Mostrar el registro sencillo del ítem

dc.contributor.advisorFlores Vega, Walter
dc.contributor.authorDíaz Chonáte, Henry Jonathan
dc.date.accessioned2016-07-20T21:29:54Z
dc.date.available2016-07-20T21:29:54Z
dc.date.issued2013
dc.identifier.otherT.530.D69
dc.identifier.urihttps://hdl.handle.net/20.500.12952/138
dc.description.abstractINDECOPI por medio del Servicio Nacional de Metrología (SNMINDECOPI) viene atendiendo la demanda de calibración en el país de cronómetros digitales, para lo cual inicialmente utilizó el método por comparación directa por medio de un sistema de filmación. Este método presenta el problema de invertir una gran cantidad de tiempo tanto en la medida como en la reproducción de los datos, además reporta una incertidumbre de medición mayor a la exactitud del cronómetro a calibrar. En este sentido se tiene la necesidad de implementar un nuevo método de calibración que se realice en el menor tiempo posible y con la menor incertidumbre de medición, por lo cual se realizó un sistema detector de frecuencias· para la calibración de cronómetros digitales. Con este sistema es posible capturar la frecuencia de refresco del LCD del cronómetro utilizando el método de inducción. Esta frecuencia es proporcional a su base de tiempo, por lo cual es posible obtener el error del cronómetro en corto tiempo y con una incertidumbre de medición < 0,1 us/s.es_PE
dc.description.abstractINDECOPI by The National Metrology Service (SNM-INDECOPI) is attending the demand of calibration in the country of digital stopwatches, for which initially used the direct comparison method using a film system. This method has the problem invest a lot of time in the measurement as in the reproduction of the data, also reports an uncertainty of measurement greater to the accuracy of the stopwatch to calibrate. In this sense there is a need to implement a new method of calibration that to be performed in the shortest time possible and with the least uncertainty of measurement, whereby was performed a frequency detector system for calibration of digital stopwatches. With this system it is possible to capture the refresh frequency of LCD of the stopwatch using the induction method. This frequency is proportional to its time base, making it possible to obtain the stopwatch error in short time and with a uncertainty of measurement < 0,1 us/sen_US
dc.formatapplication/pdfes_PE
dc.language.isospaes_PE
dc.publisherUniversidad Nacional del Callao
dc.rightsinfo:eu-repo/semantics/openAccesses_PE
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/pe/*
dc.sourceUniversidad Nacional del Callaoes_PE
dc.sourceRepositorio institucional - UNACes_PE
dc.subjectStopwatcheses_PE
dc.subjectCalibrationes_PE
dc.subjectUncertainty of measurementes_PE
dc.subjectInduction methodes_PE
dc.subjectCronómetroses_PE
dc.subjectCalibraciónes_PE
dc.subjectIncertidumbre de mediciónes_PE
dc.subjectMétodo de Inducciónes_PE
dc.titleCalibración de cronómetros digitales por el método de inducción con un mínimo de incertidumbrees_PE
dc.typeinfo:eu-repo/semantics/bachelorThesises_PE
thesis.degree.nameLicenciado en Físicaes_PE
thesis.degree.grantorUniversidad Nacional del Callao. Facultad de Ciencias Naturales y Matemáticaes_PE
thesis.degree.levelTítulo Profesionales_PE
thesis.degree.disciplineFísicaes_PE
dc.publisher.countryPEes_PE


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Mostrar el registro sencillo del ítem

info:eu-repo/semantics/openAccess
Excepto si se señala otra cosa, la licencia del ítem se describe como info:eu-repo/semantics/openAccess